This section contains messages issued by the Stand-alone Disk Image Dump and Restore program. For a complete list of ADSM messages, see ADSM Messages.
ANQ0010I DUMPREST program generated at time on date.
Explanation: The executable was generated at the indicated date and time.
System Action: Processing continues.
User Response: None.
ANQ0012E command: Invalid parameter parameter.
Explanation: An invalid parameter was specified or the parameter did not begin with a '/'.
System Action: The command is not processed.
User Response: Reissue the command with a valid parameter.
ANQ0013I Valid parameters are:
Explanation: Display valid parameters.
System Action: Processing continues.
User Response: None.
ANQ0015E command: The password parameter must be specified.
Explanation: The password parameter /p was not specified.
System Action: Processing of the command stops.
User Response: Reissue the command with the correct syntax.
ANQ0016E command: Invalid syntax.
Explanation: A valid parameter must follow the '/'.
System Action: Processing of the command stops.
User Response: Reissue the command with the correct syntax.
ANQ0017E command: A value must follow parameter /parameter.
Explanation: A value must follow the indicated parameter.
System Action: Processing of the command stops.
User Response: Reissue the command with the correct syntax.
ANQ0018E command: Initialization failure.
Explanation: Initialization has failed.
System Action: Processing stopped.
User Response: See accompanying messages for more information.
ANQ0021W
Checksum error detected during restore.
Disk
offset: disk offset, number of sectors in block:
number of sectors.
Explanation: The checksum recorded for a block of sectors at dump time does not match the checksum calculated at restore time. The error may involve one or more sectors in the block.
System Action: Restore operation continues.
User Response: It is possible that an error has occurred during data transmission. Reissue the restore command.
ANQ0037E Insufficient memory for DUMPREST program execution.
Explanation: The host computer does not contain enough random access memory.
System Action: Processing stopped.
User Response: Increase available random access memory on host computer.
ANQ0043E Error error code returned from disk access operation accessing disk disk number.
Explanation: Attempt to perform the operation on the specified disk has failed.
System Action: Processing stopped.
User Response: Verify that the disk drive is correctly installed and is operable. Verify that the correct disk drive device driver is in use. Reissue the command.
ANQ0044E Access has been denied for disk disk number.
Explanation: The disk cannot be accessed.
System Action: Operation stops.
User Response: Verify that the disk is properly installed. Verify that no other application, for example FDISK, has the disk locked. Reissue the command.
ANQ0045E Invalid disk number disk number specified.
Explanation: The disk cannot be accessed or it does not exist.
System Action: Processing stops.
User Response: Use query disk command to display valid disks.
ANQ0046W IOCTL op code string for disk disk number sector sector number count count number error error.
Explanation: A read or write operation for a disk may not have been successful. This message is issued at most four times when an error is encountered reading or writing a group of sectors.
System Action: Processing continues.
User Response: If doing a restore operation use a different target disk drive. If doing a dump operation this may indicate a failing source disk drive that needs to be replaced.
ANQ0047W Error messages suppressed for subsequent errors on disk disk number
Explanation: The number of error messages issued for a failing disk drive is limited to prevent too many messages from overwhelming the system.
System Action: The error messages are no longer issued, processing continues.
User Response: If doing a restore operation use a different target disk drive. If doing a dump operation this may indicate a failing source disk drive that needs to be replaced.
ANQ0051I command is beginning for disk disk number. Disk size is disk size MB.
Explanation: A dump or restore operation has started.
System Action: Processing continues.
User Response: None.
ANQ0052I command is complete for disk disk number. Disk size is disk size MB.
Explanation: A dump or restore operation has completed.
System Action: Processing continues.
User Response: None.
ANQ0053I Waited number of seconds seconds for the ADSM server to begin accepting data.
Explanation: Heartbeat notification that the DUMPREST program is waiting for the ADSM server to begin receiving data.
System Action: Processing continues.
User Response: None.
ANQ0054I Waited number of seconds seconds for the ADSM server to begin delivering data.
Explanation: Heartbeat notification that the DUMPREST program is waiting for the ADSM server to begin sending data.
System Action: Processing continues.
User Response: None.
ANQ0055E Bytes received from ADSM server: number of bytes. Bytes expected: number of bytes.
Explanation: The recorded size of the source dump image does not match the actual bytes received at restore time.
System Action: Processing stopped.
User Response: Verify that there are no communications or ADSM server problems. Reissue the command.
ANQ0056W Target space (number of sectors sectors) is not the same size as dumped space (number of sectors sectors).
Explanation: The drive restored to is not the same size as the drive that was dumped.
System Action: Processing continues.
User Response: Verify that the correct restore target disk was specified. Verify that the correct source dump image was specified.
ANQ0057W End of dump data before target space filled.
Explanation: The restore target disk is larger than the dump source disk.
System Action: Processing continues.
User Response: Verify that the correct restore target disk was specified (issue the QUERY DISK command). Verify that the correct source dump image was specified (issue the QUERY DUMP command).
ANQ0060E Geometries differ, FORCE not specified, restore failed.
Explanation: The geometry (cylinder/head/sector) of the dump source disk is different from the geometry of the restore target disk.
System Action: Processing stops.
User Response: Verify that the correct restore target disk is being specified. Verify that the correct source dump image is being specified. If both are correct reissue the command with the FORCE parameter. To determine the geometry of the dump source disk, refer to message ANQ0062I or issue the QUERY DUMP command. To determine the geometry of the target disk, refer to message ANQ0063I or issue the QUERY DISK command.
ANQ0061W Geometries differ, FORCE specified, restore continues.
Explanation: The geometry of the dump source disk is different from the geometry of the restore target disk.
System Action: Processing continues.
User Response: None.
ANQ0062I Dumped disk geometry (cylinders: cylinders, heads: heads, sectors/track: sectors per track).
Explanation: Geometry of the source dump image.
System Action: Processing continues.
User Response: None.
ANQ0063I Target disk geometry (cylinders: cylinders, heads: heads, sectors/track: sectors per track).
Explanation: Geometry of the restore target disk.
System Action: Processing continues.
User Response: None.
ANQ0065I *** User Aborted Restore ***
Explanation: An abort signal to stop a restore operation was received.
System Action: Restore stopped.
User Response: Continue with normal operations.
ANQ0067E File space file space name is already in use by another application.
Explanation: The file space is already registered and is used by another application. The file space name is reserved for Disk Dump/Restore.
System Action: Command fails.
User Response: Contact the ADSM administrator to resolve the file space naming conflict.
ANQ0068E No partitionable disks found.
Explanation: No partitionable disks found in the system.
System Action: Command fails.
User Response: Verify hard drives are correctly installed.
ANQ0069E Unable to extract disk information.
Explanation: Cannot get local disk information.
System Action: Command fails.
User Response: See accompanying messages for more information. If required, contact your service representative.
ANQ0070E Object object name in file space file space name is not a DRM image dump.
Explanation: The object was not created by the DUMPREST program.
System Action: Command fails.
User Response: The disk must be dumped before it can be restored.
ANQ0080I command: No match found for this query.
Explanation: No objects that match the specified query criteria can be found.
System Action: Processing continues.
User Response: None.
ANQ0081E command: Command failed.
Explanation: The specified command failed.
System Action: Command fails.
User Response: Examine the messages issued prior to this message to determine the source of the error.
ANQ0082E The password is longer than maximum password length characters.
Explanation: Specified password length exceeds ADSM maximum.
System Action: Processing stops.
User Response: Reissue command with valid ADSM password.
ANQ0083E Password change failed.
Explanation: An invalid password was entered.
System Action: Processing stopped.
User Response: Reissue command with the correct password.
ANQ0084I Password has been updated.
Explanation: The password has been updated.
System Action: Processing continues.
User Response: None.
ANQ0085W The ADSM API Library is at a lower release.
Explanation: The ADSM API library is at a lower release than the DUMPREST program.
System Action: Processing continues.
User Response: Obtain correct level of ADSM API library.
ANQ0086E Upgrade the ADSM API library to version.release.level.
Explanation: The ADSM API library is at a lower version than the DUMPREST program.
System Action: Processing stops.
User Response: Upgrade the ADSM API library and reissue command.
ANQ0087I ADSM Server for system - Version version, Release release, Level level.sublevel.
Explanation: Code level of ADSM server.
System Action: Processing continues.
User Response: None.
ANQ0088I Requesting a session with the ADSM server.
Explanation: The DUMPREST program is in the process of contacting the ADSM server.
System Action: Processing continues.
User Response: None.
ANQ0089E Session initialization with the ADSM server failed.
Explanation: The DUMPREST program was not able to establish a session with the ADSM server.
System Action: Processing stops.
User Response: Examine previous messages. If you cannot determine the problem contact your ADSM administrator.
ANQ0090I Session established with the ADSM server.
Explanation: Session established with the ADSM server.
System Action: Processing continues.
User Response: None.
ANQ0091E The DUMPREST program is not supported for this level of the ADSM server.
Explanation: The DUMPREST program is not supported for this level of the ADSM server. The ADSM server must be at 3.1.0.2 or above.
System Action: Processing stops.
User Response: Contact your ADSM administrator.
ANQ0092E Dump cannot be created. Server is not licensed for the Disaster Recovery Manager feature.
Explanation: The dump cannot be created because the server has not been licensed for the Disaster Recovery Manager feature.
System Action: Processing stops.
User Response: Contact your ADSM administrator. The Disaster Recovery Manager feature license is required for your server.
ANQ0099E Internal error encountered during DUMPREST program processing.
Explanation: An internal error has occurred during an attempt to process a command.
System Action: Processing stops.
User Response: Examine the messages issued prior to this message to determine the source of the error.
ANQ0100E command: Extraneous parameter - parameter.
Explanation: The specified command contains more positional parameters than is allowed.
System Action: The command is not processed.
User Response: Reissue the command with the proper syntax.
ANQ0101E command: One or more parameters are missing.
Explanation: The specified command has been entered without all required parameters.
System Action: The command is not processed.
User Response: Reissue the command with the proper syntax.
ANQ0102E command: Invalid disk number - disk number.
Explanation: The disk number specified in the command is invalid.
System Action: The command is not processed.
User Response: Issue the QUERY DISK command to determine valid disk numbers and reissue command.
ANQ0103E command: Invalid parameter - parameter.
Explanation: The specified command has been entered with an invalid parameter.
System Action: The command is not processed.
User Response: Reissue the command with the proper syntax.
ANQ0104E command: Invalid parameter value - parameter value.
Explanation: The value specified for the parameter is invalid.
System Action: The command is not processed.
User Response: Reissue the command with a valid parameter value.
ANQ0106E Missing value for keyword parameter - parameter.
Explanation: A command containing a keyword parameter has been entered, but the value for the parameter is missing.
System Action: The command is not processed.
User Response: Reissue the command with a value for the keyword parameter.
ANQ0107E Missing closing quote character.
Explanation: A command that contains a quoted parameter has been entered, but a matching closing quote is missing.
System Action: The command is not processed.
User Response: Reissue the command with properly matched quotes.
ANQ0108E Keyword parameter character (=) may not be surrounded by blanks.
Explanation: A command contains a keyword parameter followed by an equal sign (=), but the equal sign is preceded or followed by a blank, or both.
System Action: The command is not processed.
User Response: Reissue the command without blanks next to the equal sign.
ANQ0109E Illegal use of keyword parameter character (=) - parameter.
Explanation: A command contains the parameter shown followed by an equal sign (=), but the parameter is not a keyword parameter.
System Action: The command is not processed.
User Response: Reissue the command and enter the proper syntax.
ANQ0110E Unknown command - command.
Explanation: The specified command is not a valid command.
System Action: The command is not processed.
User Response: Reissue the correct command.
ANQ0111E command: Missing subcommand keyword.
Explanation: The specified command has been entered without a valid subcommand (second parameter).
System Action: The command is not processed.
User Response: Reissue the command with the proper syntax.
ANQ0112E command: Invalid date - date.
Explanation: The specified command has been issued with an invalid date. The specified date must be in the format you select with the DATEFORMAT option. For example, the date for date format 1 is mm/dd/yyyy, which is the American English standard.
System Action: The command is not processed.
User Response: Reissue the command with a valid date.
ANQ0113E command: Invalid time - time.
Explanation: The specified command has been issued with an invalid time. The specified time must be in the format you select with the TIMEFORMAT option. For example, the time for time format 1 is hh:mm:ss, which is the American English standard.
System Action: The command is not processed.
User Response: Reissue the command with a valid time.
ANQ0114E command: Specified value exceeds value length characters for keyword parameter keyword parameter.
Explanation: The value specified for the indicated keyword parameter exceeds the maximum length of allowable characters.
System Action: The command is not processed.
User Response: Reissue the command with a valid value.
ANQ0116E command: Both date and time values are required.
Explanation: You must specify both DATE and TIME.
System Action: The command is not processed.
User Response: Reissue the command with DATE and TIME values.
ANQ0155E Cannot find active dump object in file space file space name.
Explanation: An active dump image does not exist.
System Action: Command fails.
User Response: Use query dump command to list available dumps.
ANQ0156E Cannot find dump object with date date time time in file space file space name.
Explanation: A dump does not exist with this date and time.
System Action: Command fails.
User Response: Use query dump command to list available dumps.
ANQ0157E Cannot find dump object in file space file space name.
Explanation: A dump does not exist.
System Action: Command fails.
User Response: Use query dump command to list available dumps.
ANQ0209I We have waited seconds seconds for the ADSM server to complete the operation.
Explanation: Completion of the dump or restore operation is in process.
System Action: Processing continues.
User Response: None.
ANQ0210I You will get a status message at second second intervals during command.
Explanation: Notification of heartbeat interval in seconds.
System Action: Processing continues.
User Response: None.
ANQ0215W Error writing a group of sectors starting at sector sector number. Will re-try each sector.
Explanation: The restore target disk may be defective. If message ANQ0273W is not issued at completion of restore all sectors were successfully written. This message is issued at most ten times.
System Action: The DUMPREST program attempts to write to the target disk one sector at a time.
User Response: Consider using a different target disk.
ANQ0217W Source contains more data than will fit in target space.
Explanation: The dump source disk was larger than the restore target disk.
System Action: Processing continues.
User Response: Verify that the correct restore target disk was specified (issue the QUERY DISK command). Verify that the correct source dump image was specified (issue the QUERY DUMP command).
ANQ0218W Error reading a group of sectors starting at sector sector number. Will re-try each sector.
Explanation: The dump source disk may be defective.
System Action: The DUMPREST program attempts to read target disk sector block one sector at a time. If message ANQ0272W is not issued at completion of dump all sectors were successfully read. This message is issued at most ten times.
System Action: The DUMPREST program attempts to write to the target disk one sector at a time.
User Response: Consider replacing the source disk drive.
ANQ0259E ADSM management class management class name does not have a backup copy group assigned.
Explanation: An ADSM management class is being used that is not configured to support backup.
System Action: Command fails.
User Response: Verify you are using a valid management class. Contact your ADSM administrator.
ANQ0272W There are number of sectors invalid sectors in the dump object due to source disk read errors.
Explanation: Disk sector read errors were encountered during the dump operation.
System Action: Processing continues.
User Response: Consider replacing the dump source disk drive.
ANQ0273W number of sectors sectors were not restored due to disk write errors.
Explanation: Disk sector write errors were encountered during the restore operation.
System Action: Processing continues.
User Response: Verify the dump target disk drive is properly installed. Consider replacing the dump target disk drive.
ANQ1010E Could not detect your network adapter.
Explanation: Program OS2SNIFF could not detect your network adapter card.
System Action: None
User Response: Verify the network adapter card is properly installed in this computer. Try the CFGADAPT option to manually specify a network adapter card.
ANQ1011I Detected network adapter:
Explanation: Program OS2SNIFF detected your network adapter card.
System Action: None
User Response: Verify that the correct network adapter card was detected. If the correct one was not detected, try the CFGADAPT option to manually specify a network adapter card.
ANQ1012I Is this correct? Enter yes symbol for Yes, no symbol for No
Explanation: Confirm that the correct network adapter card has been detected.
System Action: Waiting for response.
User Response: If you select yes, installation of the network adapter card support will proceed. If you select no, installation will stop.
ANQ1013I Network adapter support not installed.
Explanation: Support for your computer's network adapter will not be installed.
System Action: None
User Response: None
ANQ1014I Please put diskette label diskette into drive drive letter
Explanation: Prompt for diskette.
System Action: Waiting for response.
User Response: Select the specified diskette, place it into the computer's diskette drive and press enter.
ANQ1015I Please copy network adapter NIF name and device driver to diskette label diskette.
Explanation: The network adapter NIF definition file and the associated device driver file must be copied to the specified diskette.
System Action: None
User Response: Obtain the NIF configuration and OS/2 device driver files from the network adapter manufacturer and copy them to the diskette, then retry CFGADAPT.
ANQ1016I Put diskette containing adapter NIF name and device driver into drive diskette drive
Explanation: Insert the diskette that contains the network adapter NIF configuration file and OS/2 device driver file. You may have obtained this diskette or the files from the manufacturer of the network adapter or your company's LAN support personnel.
System Action: Waiting for response.
User Response: Insert the diskette and press enter.
ANQ1017I Enter NIF name full file name or exit symbol to exit. Example: example file name
Explanation: You must tell CFGADAPT the full path name of the network adapter NIF configuration file that is on the diskette. This includes any directories.
System Action: Waiting for response.
User Response: Specify the file name including directories, if any and press enter.
ANQ1018E Could not find network adapter device driver device driver name
Explanation: The network adapter device driver specified by the NIF configuration file could not be found.
System Action: Processing stops.
User Response: Verify that you have both the NIF configuration file and OS/2 device driver file on the diskette. Verify that both the NIF configuration file and OS/2 device driver files are the correct one for the network adapter in your computer. Contact the network adapter manufacturer for assistance in obtaining the correct NIF and device driver files.
ANQ1019E There is no file name file.
Explanation: The file cannot be found on the diskette.
System Action: Processing stops.
User Response: This file is required. If it cannot be found, you will need to obtain a new set of diskettes from the ADSM administrator.
ANQ1020E Network adapter's device driver file name or NIF file name file name is unknown.
Explanation: The file name of the network adapter's OS/2 device driver or the NIF file could not be determined.
System Action: None
User Response: None
ANQ1021E program name could not complete network adapter installation.
Explanation: Support for the network adapter could not be configured.
System Action: Processing stops.
User Response: Obtain the correct OS/2 device driver and NIF files from the network adapter manufacturer and retry CFGADAPT.
ANQ1022E Obtain file file name, copy it to volume label diskette, and try again.
Explanation: The file could not be found.
System Action: Processing stops.
User Response: Obtain the specified file from the network adapter manufacturer, copy it to the specified diskette, and try again.
ANQ1024I Adding statement content statement to file name
Explanation: The configuration statement is being added to the configuration file.
System Action: None
User Response: None
ANQ1025I Copying network adapter device driver device driver name
Explanation: The network adapter device driver file is being copied.
System Action: None
User Response: None
ANQ1026I Creating configuration file name based on NIF name file NIF file name
Explanation: The OS/2 communications configuration file is generated based on the information in the network adapter's NIF information file.
System Action: None
User Response: None
ANQ1027E Could not create file configuration file name based on file NIF file name for your network adapter.
Explanation: The OS/2 communications configuration file could not be generated based on the information in the network adapter's NIF information file.
System Action: Processing stops.
User Response: You must obtain a valid NIF file from the network adapter's manufacturer.
ANQ1028E You must obtain file file name and copy it to diskette volume label
Explanation: A valid NIF file for the network adapter is required.
System Action: Processing stops.
User Response: You must obtain a valid NIF file from the network adapter's manufacturer and copy it to the specified diskette.
ANQ1129I Note the number of the adapter in your machine, then press return key.
Explanation: You must select the network adapter that is in the computer.
System Action: None
User Response: Review the list of network adapters, remember the number associated with the one in the computer, then press the specified key.
ANQ1031I What was the number of your adapter? (Use cancel key for cancel)
Explanation: Prompt for entry of the number associated with the network adapter to be selected.
System Action: None
User Response: Enter the number of the selected network adapter and press enter.
ANQ1032I selection number is not a valid number from the adapter list.
Explanation: A number was specified which was not in the list of network adapters.
System Action: None
User Response: None
ANQ1133I Note the number of your PCMCIA machine, then press return key.
Explanation: You must select your PCMCIA machine from the list.
System Action: None
User Response: Review the list of PCMCIA machines, remember the number associated with yours, then press the specified key.
ANQ1035I What was the number of your PCMCIA machine? (Use cancel key for cancel)
Explanation: Prompt for entry of the number associated with the PCMCIA machine support to be selected.
System Action: None
User Response: Enter the number of the selected PCMCIA machine and press enter.
ANQ1036E selection number is not a valid number from the PCMCIA machine list.
Explanation: A number was specified which was not in the list of PCMCIA machines.
System Action: None
User Response: None
ANQ1037I To make changes active you need to:
Explanation: Tell user how to make the changes active.
System Action: None
User Response: None
ANQ1038I 1. Put diskette DRMBOOT in drive A:
Explanation: Tell user how to make the changes active.
System Action: None
User Response: None
ANQ1039I 2. Reboot the PC.
Explanation: Tell user how to make the changes active.
System Action: None
User Response: None
ANQ1040I Configuring ADSM
Explanation: The ADSM options file is being built based on CFGCOMM configuration.
System Action: None
User Response: None
ANQ1041I Starting TCP/IP
Explanation: The OS/2 TCP/IP support is being started.
System Action: None
User Response: None
ANQ1054E Could not find file description file file name
Explanation: The specified file could not be found.
System Action: None
User Response: None enter.
ANQ1055E Could not write line line content to file file name
Explanation: The specified update could not be made to the file.
System Action: None
User Response: Ensure there is enough room on the diskette. You may need to use a set of freshly generated diskettes.
ANQ1143I Diskettes configured for: network adapter name
Explanation: The diskettes have been configured for the specified network adapter.
System Action: None
User Response: None